Suggestion: Indicator on wall which side is going to have re-enforcement on it.

[Brez 46]

I was finally able to play around with re-enforcing a couple of walls and found it a bit of a pain..

The main reason was because you never really know which side of the wall will get the re-enforced metal on and sometimes it puts it on the inside instead of the outside of the wall.

So here I am moving the wall trying to get it on the outside.. But wait.. it doesn't show me which side that is.  So here I spin the wall around and then snap it in position.   The snap feature I'm thinking is spinning the wall back when the snap is engaged because the re-enforced side is again going on the inside.

I suggest you guys maybe change the color of the wall when it's yellow (being placed/moved) so the side with the re-enforcement is another color or another shade of yellow so players know which orientation to put it..

The easier solution would probably be to put the re-enfoced metal on both sides of the wall when it's upgraded. 

 

 

 

[Phantomz 18]

I would like if it where on both sides.

[Manny 9]

I would like if it where on both sides.

I agree. Reinforcement showing only on one side makes absolutely no sense unless the devs at some point wanted to have to reinforce its side separately.

[Griffon216 2]

I agree. Reinforcement showing only on one side makes absolutely no sense unless the devs at some point wanted to have to reinforce its side separately.

Sorry i disagree you can shoot straight through the wood only walls so if you have only had a chance to reinforce some walls anybody outside would see your reinforcement showing or not as the case may be and just fill your base full of lead through the walls with no protection.

Also at distance just driving passing bases it becomes obvious which are the easy targets,