OneShotPaddy

When does it crash for you? Random / intermittent What was the last thing you have seen before it crashed? Separate scenarios: 1) staring into the distance and press 2 to change weapon 2) staring at the XM8 tablet 3) opening loot to pick up a standard assault backpack 4) The moment I was shot and sent to the respawn timer 5) selecting the next vehicle in a vehicle vendor 6) purchasing a Hummer and being spawned with it Does it crash every time or just sometimes? Almost every session but at different intervals, but happens CONSISTENTLY when I am trying to drive. I can get going and within less than 1 minute the game freezes and crashes, dropping me from the vehicle. Which Arma version and branch (Stable, Dev, RC/Sneak Peak) are you running? Latest stable version from Steam, mods (including Exile) via the A3Launcher Which Arma DLCs do you own? Karts? Marksmen? APEX? Helicopters? Zeus? Apex and Zeus Which operating system are you using? Windows 10 Are you using a custom memory allocator? (-malloc start-up parameter) Tried with and without. Currently launch parameters in Steam are set to 4GB Please let off some steam here Have verified the mods via A3Launcher (which just uses Steam anyway) and Arma 3 via Steam. Rebooted device. Reinstalled Exile by deleting the files and verifying. If possible, please show us your .rpt file, e.g. via Pastebin Exceeds maximum Pastebin limit If possible, upload the last "Minidump" (.bidmp and .mdmp files) here. You can find them next to the .rpt When opened, it shows garbled characters

Issue seems to have been resolved. Apparent Resolution: - Forced hyperthreading - Set max RAM to 6GB The above changes were made in A3Launcher's settings via the launch parameters box EDIT: This worked for a time but now I am crashing as I attempt to enter the same server after its reset period. I reach the loading scree, the bar loads several times and then the game just quits. This has been resolved, but now I am back to crashing when a helicopter lands nearby.

Thank you, that seems to have resolved the restrictions for now. Of course, at present I'm having separate issues with Ryan's Zombies mod's bikey. Thank you for your patience! No doubt you will see me again haha.

01.03.2016 19:40:03: Pheonix (192.168.200.21:2304) 85d58db2808a95d020c8ff7dfc120f65 - #18 "tNameParent = if (isNil '_fnc_scriptName') then {'BIS_fnc_recompile'} else {_fnc_scriptName}; private _fnc_scriptName = 'BIS_fn" 01.03.2016 19:45:59: Pheonix (192.168.200.21:2304) 85d58db2808a95d020c8ff7dfc120f65 - #18 "tNameParent = if (isNil '_fnc_scriptName') then {'BIS_fnc_recompile'} else {_fnc_scriptName}; private _fnc_scriptName = 'BIS_fn" 01.03.2016 19:56:48: Pheonix (192.168.200.21:2304) 85d58db2808a95d020c8ff7dfc120f65 - #18 "tNameParent = if (isNil '_fnc_scriptName') then {'BIS_fnc_recompile'} else {_fnc_scriptName}; private _fnc_scriptName = 'BIS_fn" 01.03.2016 20:09:12: Pheonix (192.168.200.21:2304) 85d58db2808a95d020c8ff7dfc120f65 - #18 "tNameParent = if (isNil '_fnc_scriptName') then {'BIS_fnc_recompile'} else {_fnc_scriptName}; private _fnc_scriptName = 'BIS_fn" 07.03.2016 22:52:46: Pheonix (xx) 85d58db2808a95d020c8ff7dfc120f65 - #0 "ue; _button = _display displayctrl 1085; _button ctrladdeventhandler ["buttonclick","with uinamespace do {['missionSummaryButt" 09.03.2016 23:09:44: Pheonix (xx) 85d58db2808a95d020c8ff7dfc120f65 - #0 "ue; _button = _display displayctrl 1085; _button ctrladdeventhandler ["buttonclick","with uinamespace do {['missionSummaryButt" 18.03.2016 13:55:14: Pheonix (xx) 85d58db2808a95d020c8ff7dfc120f65 - #20 ") then { Ryanzombiesfncs = 1; fnc_RyanZombies_SwitchMove = compileFinal "_this select 0 switchmove (_this select 1)"; fnc_RyanZ" The above code is my Script.log. I just tried to install Ryan's Zombies and Demons on my Exile server (no other mods) and when I joined (with a Steam Workshop install of the mod on my client) I received Battleye Script Restriction #20. I read through some "do it yourself" battleye fixes but am not so comfortable with my understanding of the script syntax yet to fix this one on my own. Does anyone have any suggestions or possibly just a fix? No doubt I will receive other battleye errors after I fix this one, so if anyone has any experience with this mod please let me know. Mainly looking to put together a server with MASWeapons/Vehicles, Zombies and Demons, and some missions. Any thoughts or forewarning would be appreciated. Thanks in advance guys.

Hey thanks for the quick reply! I did as you said and it took care of the restriction 20 but now I have a restriction 18. I'm going to include the log below along with what I did to try to fix it. 19.03.2016 18:50:52: Pheonix (192.168.200.21:2304) 85d58db2808a95d020c8ff7dfc120f65 - #18 "tNameParent = if (isNil '_fnc_scriptName') then {'BIS_fnc_recompile'} else {_fnc_scriptName}; private _fnc_scriptName = 'BIS_fn" 19.03.2016 18:59:29: Pheonix (192.168.200.21:2304) 85d58db2808a95d020c8ff7dfc120f65 - #18 "tNameParent = if (isNil '_fnc_scriptName') then {'BIS_fnc_recompile'} else {_fnc_scriptName}; private _fnc_scriptName = 'BIS_fn" 19.03.2016 19:04:37: Pheonix (192.168.200.21:2304) 85d58db2808a95d020c8ff7dfc120f65 - #18 "tNameParent = if (isNil '_fnc_scriptName') then {'BIS_fnc_recompile'} else {_fnc_scriptName}; private _fnc_scriptName = 'BIS_fn" 19.03.2016 19:09:21: Pheonix (192.168.200.21:2304) 85d58db2808a95d020c8ff7dfc120f65 - #18 "tNameParent = if (isNil '_fnc_scriptName') then {'BIS_fnc_recompile'} else {_fnc_scriptName}; private _fnc_scriptName = 'BIS_fn" 19.03.2016 19:12:23: Pheonix (192.168.200.21:2304) 85d58db2808a95d020c8ff7dfc120f65 - #18 "tNameParent = if (isNil '_fnc_scriptName') then {'BIS_fnc_recompile'} else {_fnc_scriptName}; private _fnc_scriptName = 'BIS_fn" I tried to add the following code to line 18 but it still gives the same error !="tNameParent = if (isNil '_fnc_scriptName') then {'BIS_fnc_recompile'} else {_fnc_scriptName}; private _fnc_scriptName = 'BIS_fn"

Just made it to the finish line on a fresh install of the server on a new distro of linux (GUI's are lifesavers FYI). I'm booting into the game fine and haven't had any trouble with other servers (need to verify that today, but I'm assuming it's just my server since within the past week I was playing on some other ones with incident) but when I try to join my dedicated box server across the LAN I get all the way through the loading screens and unit selection to a black screen. The interesting part is that I do see on the right side, that little yellow icon for disconnection for just a moment but otherwise it sits there at a black screen. I've tried twice so far. Does anyone have any suggestions for a poor noob server admin? I'm assuming if my files were messed up I'd see an error when the client connects, but in the server terminal there is nothing that I recognize as catastrophic. I also don't get disconnected from the server according to this terminal until I Control-Alt-F4 my way out of the game.

Hey Scott, I am currently tied down with a plethora of college work, but I saw the notifications and wanted to stop by to say thanks for your input. I've tried some similar steps tot he ones you've provided but I'm going to go back and follow yours like a roadmap as soon as I get the chance. If you'd be willing, I can do a remote session with you and you can see what I can see. Maybe this could help me get off the ground? If not, I understand. I'm not looking to take up too much of your time, just trying to get this up and running and ArmA seems to like throwing wrenches in the best laid plans.

So I'm running an Ubuntu Vanilla Exile server and I've installed everything through SteamCMD, then moved in the @Exile and @ExileServer folders, however even after configuration and some help from some nice people, I can't get into the server. I've disabled Battleye temporarily but when I login to the server, I'm able to get to the point when I should be seeing the game, but instead it's a black screen. While at this black screen, I see the losing connection icon in the top right appear and disappear, so I'm only quasi in game? I have no way to generate RPT files because even after modifying my start line to include "-profile...and -name..." , my auto-created profile folder is empty except one .log file which is blank. Does anyone have experience with this issue? I've tried several clean installs of both Exile and Arma files (one full new set tonight). I'm available to join Teamspeak servers to facilitate better communication. I can also be found on Steam: OneShotPaddy. I have Teamviewer if anyone would like to see what I'm seeing as well.

Welcome Back

Thanks, I've had some other ideas thrown around too. I checked to make sure MySQL is running, and it is. Is there something else I can do?

So I'm not sure if this is the issue, I'm pretty new to linux and mysql but I managed to get myself into the root account and manually start the exile database. That seemed to fix the issue above, but now I get warnings like the one's below. 9:15:02 Warning Message: You cannot play/edit this mission; it is dependent on downloadable content that has been deleted.exile_client 19:15:02 Mission Exile.Altis read from bank. 19:15:02 Missing addons detected: 19:15:02 exile_client 19:15:02 Warning Message: You cannot play/edit this mission; it is dependent on downloadable content that has been deleted.exile_client ^C19:15:02 Mission Exile.Altis read from bank. I have re-extracted the client folder and overwritten it. Still the same results. I'm tempted to just start from the beginning with yet another clean install.

Thanks much! I knew I must have just overlooked something. It took me a while, wrestling with access to the root account in order to find the right folder for mysql. Unfortunately, I tried to run mysql to make sure it was working and from what I could tell it worked but I have little in the way of information about the problem. I've looked for the logs in the folder described in the command line, but there are no logs there? I'll keep trying though, thanks just the same.

Just realized this probably needs to be moved to the Bugs and Problems section, my apologies.

I am struggling as well. Just discovered that ExtDB v70 won't work by reading another guy's response, so now I have to go out and find ExtDB 65? What does it even do? Anyway, to answer your question, I had to download and install 7zip and use that on my linux box with the parameter "-e" after 7z in order get it to extract any rar files. To be fair I'm new to Linux so if anyone wants to run me through the basics I would be very grateful. The sooner I get through the kid stuff, the sooner I can graduate to doing cool stuff (or at least being less frustrated).

So I'm following the guide HERE and am stuck now on the download. I obviously had to get a different URL for the wget command because this guide is before the new version of the files. I did this by going to the downloads page on this site and clicking "get link address" then used that to download the files through the wget command. I then installed unzip and 7zip but neither of these can open the server files, even going so far as to suggest they may corrupted. Since there is only a single download link on the downloads page, I can't really test that theory. Although I'm new to Linux (this is partly a learning experience for me), I would very much like to use it to run my server (because paying more money to Microsoft is not my idea of fun). Has anyone else run into this problem, or have possible solutions? What I've Tried: running the zip -F command running zip -FF running "7z e" running unzip My System:

I don't think this poor guy was looking for the English forum.

Pretty sure this is the wrong forum for this. But, if you press 6 and open the tablet, you'll see some options. One of them is the network, click that and select the person, then on the right hit "grant rights" under the name of your base. Then, go back and select "territory" and promote the person as needed (not sure what rank is needed to build). This is the only way I think that it can be done, but others may have better advice for you. Good luck.

Hey Vip3r, I found that I had to open MySQL Workbench and start a new database (called a schema, option is in the toolbar at the top of Workbench) and then double click its name in the bottom left of the screen until it was bolded. THEN I copy-pasted some Query commands from the stickied thread at the top of this forum (the one about the package) and then executed them. Once I did, I stopped getting database problems. If you want, I can help you out just PM me your Skype info or something and I'll talk you through it.

Much appreciated. I can't seem to get my server visible on the LAN list or the internet list. I'm hosting it on LAN, with the correct ports (as far as I'm aware) for both Steam and Arma 3. I've followed your instructions to the best of my ability and have managed to get the application to launch with no errors, claiming the game has started. However, it doesn't appear. If anyone has any tips or ideas please feel free to PM me.