hieve

Hey there, small bug on the webpage found if you sort the Server list by players it will show a bad listing its ordered by the number at the beginning instead of its real value (that means ten is in the same order as 1 , even theres 9 numbers between) that makes it difficult to see the best populated servers

dayum... 1 year later same thing. REPRODUCE BY: sort by -> online players I do think I can count correctly to be honest, and !!!!5 IS NOT MORE THAN 20!!!! its a simple logic failure in the code, 1,2,3,4,5,6,7,8,9,10,11 is the numerical order ,but displaying will list 1,11,12,2,25,3, and so on

4 months later - still an issue... such simple mistake... not much wow

tools like "task manager" may pull the data from top and just display it in a different (and maybe better) way. Ryans Zombies are not good optimized, especially with High Amounts of them! Over 200 Zeds on the whole map and the Server can suffer huge perfomance impacts. Especially if you forget dead bodie deletion and/or triggering alot of "Zed-Zones"

you just haven't setup your server properly and now raging abit I think battleeye is a bit complicated , but it does its job when setup correctly! and writing a new anti hack... yeah, have fun dude

yes and no. the tool itself won't take lots of ressources but every output in any form (especially on highly populated servers) can decrease the perfomance slightly(we talk here about minimal numbers of fps, but it can summarize on lots of events, and i mean like >5 events per seconds) I used this tool when it was released and it was very helpful to monitor your server, especially when you need statistics on different impacts so gj @maca134 and @Torndeco

can't recommend essentials, pretty bad perfomance, especially the win10 gui is just taking unncessary loads of perfomance

if your server gets attacked by an attacker and you host it at home, your connection can be down also, this is a big difference... Things you should think about when hosting at home: -seperate Powerfull machine/VM(running at the same Rig as you use ,is in most cases no solution for a real server, your players can have micro lags when you browse and do other stuff) -Connection Speed(10mbit in both ways should be atleast minimum, more players = more speed needed) -Seperating the server from your usual network -dyndns (if you have a dynamic IP) -power cost (and this is the point which may be heavy in most cases, especially with consumer hardware)

Hey guys, here for you some custom crafting recipes which can be added to your missions config.cpp some were created here in the forums, some were created by myself here are all recipes(including exile's originals): here are the categorized ones for usage with the Recipe App(including exile's originals): notice : if you use woodsticks, you will get a Warning Message actual - there is no Image file for these available, but they can be used normal. If you dont want this warning message for your players replace all Exile_Item_WoodSticks with Exile_Item_WoodPlank for example

you ever played without the dlcs? you get loaded full of advertisment on your screen with "BUY IT NOW!!" and you can't interact with the weapons or the cars, which is really bad from survival statement (the dlc weapons are NATIVE in the exile mod , so they are in!)- there are hooks for this to workaround, but these are not really legal , so no real solution please check your posting first next time before you write..

ich finds zwar auch etwas dreist die eierlegenden wollmilchsau zu verlangen nachdem hier schon viele anleitung vorhanden sind... aber er hat leider recht! die anleitung sind teils nicht sehr gut oder veraltet - fehlinformationen außerdem auch... es fängt schon damit an welche appid verwendet werden soll bei der installation über steamcmd(selbst die anleitung in der wiki von Bohemia ist nicht aktuell) einmal wird gesagt man solle eine "appidA -beta" verwenden, dann wäre es nur "appidB". geklappt hat es bei meinen letzten versuch mit beiden nicht mehr wirklich(nachdem aber hier auch diverse bugs mit den neuen patches berichtet worden sind , hab ichs aufgegeben fürs erste) zum pbo manager und derartige programme - sie funktionieren zwar, die seite auf der es gehostet wird ist allerdings sehr unseriös und außerdem meckert das viren programm das hier etwas nicht stimmt - ob das jetz aufgrund der programmierung ist oder wirklich malware ist steht offen (ich vermute ersteres) mein tipp: nutz die anleitung aus der bohemia wiki in kombination mit der erklärung wie steamcmd funktioniert, alles weitere wirst du hier im forum finden, auch wenn das geduld und zeit braucht - server hosting bedeutet einarbeitungszeit, die solltest du bereit seit zu investieren wenn du jedoch immernoch es einfacher haben willst, ich meine hier gab es sogar fertige server pakete(für windows und linux) - evtl. mal danach schauen

this is not the issue. dev server had be disabled and still the same

exile does not support native eden editor - you can't open the standard mission via eden. try 2d editor, this has worked fine for me so far , ai has always worked there...

if the mod did not make it right, the mod failed at this! and there are many mods out there which are just 50% finished... exile vehicles are all fine, what you are talking about is 3rd party mods and they may contain false informations - its up to you to change this or to get in contact with the mod author I don't think this is a exile issue also there's some way to change this - but this needs people and motivation to add for every mod vehicle the correct properties..

sure... my whole mission was made in the editor besides AI systems etc. i had put in over 1000 different things via editor without probs... but yeah : its a workaround and no real solution - even with allowdamage false they can be killed for some reason and moreover the strange thing here is : Static Gunner AI can shoot out of the safezone and hit for example a enemy ai helicopter down, they can also shoot zombies in the safezone down... while players can't shoot them(if you place them in the safezone) you can just drive over them... so be sure to do something against this(putting them into a building, putting sandbags around them, idk, there are several ways to safe them)

what you are looking for is called caching... im pretty sure on of the 3 AI systems has this in. the ai will be persistent, but cached, so no perfomance is lost else you will need to spawn them everytime someone comes around and I think thats more inefficent than just caching them...

yup

+ for this also looked for something liked this. my workaround now : setup 4 armed static gunners at the safezones and let them shoot everything that comes along - works pretty fine and looks good

1.if you want to take away tools like the pliers by crafting a floodlight, you would add them to components instead of putting them into tools - but as items don't have health, it does make that much sense in my opinion... 2. hm no idea here, this would need customizing exile code, as you can't change the money clientside at the moment.

+ for varity of building object it looks just shit when you want to rebuild something for example and then half of the side hangs out cause there is no model thats fits really into there...

holy shit, please make a spoiler ouf of your server log , longest thread ever there is some error which could lead to disfunction at connecting: besides : Is cba supported in exile currently? i thought it will come next update and isn't yet

>if you got this just take a look at the server log whats really happening.it should be described exactly whats up i never had msg finished and unsuccessful before...it was most time finished or said what went wrong. but is there a database now? so you see tables? and do you have strict mode in the correct setting?

you could open the map in 2d editor.. > there you can drag around the spawn points easily, but if you rename them, they will not be marked anymore as Exile spawnpoints(you see this when they change the icon), so you manually will need to set up this in mission.sqm again or just take the coordinates from the 3d editor(x and y in this case) and lookup for the spawnpoints name you want to change > for spawnpoints you don't need the Z-Axe , cause like above mentioned, you could also set this up in 2d editor easily im not sure what you mean by scrolling out? even in the 3d editor I would use the Map(then it looks like 2d editor) to setup spawn points, cause the height and distance someones spawns will be setup somewhere else!

1. check your keys folder for the exile key 2. whats your launch parameters?